/ AUDIO Modules*

DOWNLOAD [0.9.2] - Oscillator is an multiple waveforms generator: sine, triangle, sawtooth ramps upward and downward, square and random. You can modulated the Frequency with the (e.g. another) Oscillator's module or via external audio source. This is good for audio (like VCO) or for the expression control (like LFO) of the other modules.
DOWNLOAD [0.9.2] - Modulator is a stereo signal-processing effect adopting the concept of 'ring modulation' or FM with four multiple waveforms: sine, triangle, square and random. You can modulated the Frequency with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.1] - Ramps is an double envelope generator for external stereo or double mono audio sources (like ADSR). You can trigger in manual mode, with an external audio source (like gate detector), or activate by internal clock. You can modulated separately the Attack and Decay with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.3] - Equalizer is based on the set of three stereo filters (like VCF), including High-pass, Band-pass and Low-pass with Resonance. For any filter you can select the octave of cutoff and modulate it separately by (e.g.) Oscillator's module or via internal audio sync.
DOWNLOAD [0.9.1] - Saturator is a stereo signal-processing effect with two types of distortion combined with a pitch shifter and a decimator. You can modulated separately the Tone, the Pitch and Shifter with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.1] - Granulator is a stereo signal-processing effect adopting the concept of 'granular synthesis'. This module is based on Spencer Russel's work. You can modulated separately the Grain, Density, Pitch and Delay with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.1] - Delayer is a stereo audio effect with two second of double delay. You can modulated separately two Time, Feedback and Cutoff (aka Room Size) with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.1] - Procexor is a stereo signal-processing compressor with parameters of Trashold, Ratio, Time, Envelope and Delay. You can modulated separately the Attack, Decay and Delay with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.1] - Reverber is a stereo audio reverberation effect with parameters of Room Size, Damping, Wet and Dry, Cutoff and Freeze. You can modulated separately Room Size, Freeze and Cutoff with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.1] - Decks is a double stereo audio player with parameters of Play, Reverse, Speed and Trigger Position. You can modulated separately all parameters with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.3] - Transist is an monophonic synthesizer with two oscillators (or VCO): one based on pulse-width modulation (like PWM) and the second on sawtooth wave. You have also a white noise generator, a envelope generator (or ADSR) and a low-pass filter (or VCF). You can modulated separately all parameters of Cutoff, Decay, and Pitch with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.2] - Voices is an polyphonic synthesizer with within twelve oscillators (or VCO) based on pulse-width modulation (like PWM) with additional sine wave and white noise; all oscillator are in sync with dedicated filter. For each oscillator, this synth is provided with a envelope generator (or ADSR) with 'solo' function and two types of filters (or VCF) including: Low-pass, High-pass. With this module you can manage also the external audio stereo source throught the frequency and gate detector. The last but not the least feature is the internal sequencer controllable by the same source or by an internal clock. You can modulated separately all parameters of Frequency, PW, Envelope and Resonance with the (e.g.) Oscillator's module or via external audio source. Is also provided with all twelve separate outputs if you had a sound card can handle this possibility.
DOWNLOAD [0.9.2] - Shepard is a mono audio Oscillator based on infinite scale's concept within twenty oscillator with three multiple waveforms (pulse with, sine, and sawtooth ramps upward and downward). You can modulated separately the parameters of PW and Frequency with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.2] - Binaural is a stereo audio Oscillator based on binaural beats's concept within two oscillator with four multiple waveforms (pulse with, sine, triangle and sawtooth ramps upward and downward) plus two types of noise (white and pink). You also have a tone selector with five wave possibility: Gamma, Beta, Alpha, Theta and Delta. You can modulated separately the parameters of PW, Binaural and Frequency with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.2] - Guttural is a mono audio Oscillator based on non-phoneticians human voice's concept within one oscillator with two multiple waveforms (pulse with and sawtooth ramps upward and downward) and three special High-pass filters (like VCF). You can modulated separately the parameters of PW, Frequency, Cutoff and Resonance with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.2] - Aux is a simple auxiliary send with seven stereo signal-routing plus gate-extractor output. You can modulated separately any Level with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.1] - Mix is a simple mixer with two group of three stereo signal input. You can modulated the two group with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.1] - Recorder is a simple sound board with multitrack recording: six stereo audio channel with pan plus five mode recorder (in .wav). You can modulated separately any Level and Pan with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.1] - Oscillum is a simple oscilloscope with twelve inputs. Is useful for analyzing the waveforms or envelopes in a sound.
DOWNLOAD [0.9.1] - Spectrum is a simple mono spectrogram with five range selector. Is useful for analyzing the spectrum of frequencies in a sound.

 

/ MIDI Modules*

DOWNLOAD [0.9.3] - Key is an virtual MIDI keyboard with one octave at a time. Uses your PC-Keyboard to play notes: letters for semitones and numbers for select octaves. You can play via MIDI-OUT the external instruments or - via ReTuner - the other pDd's modules (like monophonic mode by Oscillator with Ramps or Transist and polyphonic mode by Voices).
DOWNLOAD [0.9.1] - Envelope is a simple MIDI ADSR generator and It's perfect for playing your external instruments or other pDd's modules. You can also play the Envelope via external MIDI keyboard. It's possible to modulated any control separately (Attack, Decay, Sustain, Release, Glide, Accent and Length) with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.4] - Arpeggio is an MIDI mono arpeggiator. You can put in sequence from one to twelve semitones with an interval of two to twelve steps and control them by Octaves, Accent Time (with Divider and Multiplier) and Directions. Arpeggio work by internal clock in BPM, but you can play it by your external MIDI keyboard-sequencer or another Arpeggio. You can play via MIDI-OUT the external instruments or - via ReTuner - the other pDd's modules (like Transist). You can modulated separately any control with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.3] - Stepper is an MIDI sequencer. This module allows you to sequencing the twelve semitones in twelve steps for twelve octaves. You can select the range of sequence for all steps and the range of octaves for any semitones and synchronize these with sequence (aka Arpeggio). You can control the Velocity for any twelve step, the Direction, Glide and Clock Divider for any single semitones. Stepper work by internal clock in BPM, but you can play the sequence by an external audio source (like gate detector). You can play via MIDI-OUT the external instruments or - via ReTuner - the other pDd's modules (like monophonic mode by Oscillator with Ramps or Transist and polyphonic mode by Voices). You can modulated separately any Clock Divider with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.2] - Randomize is an MIDI mono random generator. You can control a randomic sequence by a 'gate probability' with control of Accent, Length and Time (with Divider and Multiplier), plus twelve key-button for extract the note sequence. Randomize work by internal clock in BPM or Sample and Hold manual button, or by another pDd's modules (like Randomize). You can play via MIDI-OUT the external instruments or - via ReTuner - the other pDd's modules (like Transist). You can modulated separately any control with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.4] - Converter is a MIDI Control Change converter to a expression signal. It is designed to be used with a part of analog-to-digital system (like Doepfer A-192 CVM16: CV-to-MIDI Interface) or similar. With this module you can manage MIDI 'CC' events for control all pDd_Modules. You can modulated separately any Level with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.1] - ReTuner is a MIDI-Hz converter. Its leitmotiv is that the pitch-scale is based on your selected Herz (in MIDI note C), but - through bypass - you can also use the classic-pitch (e.g. A4 = 440 Hz). With this module you can manage MIDI events in monophonic (like Oscillator with Ramps or Transist) and polyphonic (like Voices).

 

/ VIDEO Modules*

DOWNLOAD [0.9.2] - Area is the Gem's window output for your video data stream. You can select different aspects of the video formats in accordance with the output device that uses, the full-screen option - in the first or second screen -, the antialiasing option, buffering with clear control and a pseudo 3D effect. The last but not the least feature is the shooting possibility (by .jpg file)
DOWNLOAD [0.9.2] - 2-Desk is a module that allows you to manage various aspects of two video streams on two separate channels in 2D. You can modulated separately the 'X' and 'Y' axis dimension with the (e.g.) Oscillator's module; the black & white, and the inverted color with your external audio source (via Aux or other trigger module).
DOWNLOAD [0.9.2] - Geometry is a module that allows you to manage various aspects of one video streams on a separate channels in 2D or 3D geometric forms. You can modulated separately the 'Z' axis dimension with the (e.g.) Oscillator's module; the black & white, and the inverted color with your external audio source (via Aux or other trigger module).
DOWNLOAD [0.9.1] - Eyed is a module that allows you to manage a video stream outside - depending on your devices. Normally use with the webcam. In addition there is the possibility of converting the source in a 'movement-selector'. You can modulated separately all colors (RGBA) with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.1] - Movie is a module that allows you to manage a video file (like media player) in according with your computer-system. In addition there is the possibility of converting the source in a 'movie-frame-sequencer'. You can modulated separately all colors (RGBA) and Frame with the (e.g.) Oscillator's module; play and render with your external audio source.
DOWNLOAD [0.9.3] - Animine is a module that allows you to manage a twelve image file in sequence. This is good for making small animations in loop. You can modulated separately all colors (RGBA) with the (e.g.) Oscillator's module and step-sequence with MIDI or your external audio source.
DOWNLOAD [0.9.2] - Animator is a module that allows you to manage a one hundred and twenty image file in sequence. This is good for making big animations in loop. Unlike the Animine's module you can't upload images directly, but you have to create subfolders with files already nominated (A00000, A00001, A00002, …, A00120). You can modulated separately all colors (RGBA) with the (e.g.) Oscillator's module and step-sequence with MIDI or your external audio source.
DOWNLOAD [0.9.1] - Solidum is a module that allows you to manage a .obj file. In addition there is the possibility of insert the Translater's module for guest a position parameters; use a Lighter's module for guest the light parameters. You can modulated separately all colors (RGBA) and Frame with the (e.g.) Oscillator's module or external audio source.
DOWNLOAD [0.9.1] - Kaleido is a effect-module that allows you to manage a video-image source based on kaleidoscope concept. You can modulated separately all angle-format and axis-position of image-reflection with the (e.g.) Oscillator's module or external audio source.

DOWNLOAD [0.9.3] - Polarizer is a multi effect module that allows you to manage a video source by many parameters: Backlight, Motion Blur, Delay, Feedback, Gain and Puzzle. You can modulated separately all parameters with the (e.g.) Oscillator's module and with your external audio source (via Aux or other trigger module) the Puzzle effect.
DOWNLOAD [0.9.1] - Translater is a module that allows you to manage the spatial location of your video-image plus mouse function. You can modulated separately all axis-position, axis-rotation and global size with the (e.g.) Oscillator's module or via external audio source.
DOWNLOAD [0.9.1] - Lighter is a module that allows you to manage a light effect. It's good to work with the Translater's module for guest a position parameters, Geometry and Solidum's module for guest the depth perception. You can modulated separately all colors (RGBA), 'X' and 'Y' axis rotation with the (e.g.) Oscillator's module or external audio source.
DOWNLOAD [0.9.2] - Pointer is a module that allows you to manage a point effect by OpenGL. You can use a mouse function to draw directly on the screen. You can modulated separately all colors (RGBA), 'X' and 'Y' axis position with the (e.g.) Oscillator's module or external audio source.
DOWNLOAD [0.9.2] - Tracker is a module that allows you to detect the movement from your video stream (with Eyed or Movie): X and Y axis, and Size. You can select the preferred value on which to collect the data of interest: Grey, Red, Green, Blue or Alpha. This is good to control the expression of other audio modules or to play an external MIDI instruments.

____________

* push a banner for more info!